Pool Pump Covers & Equipment Enclosures
Pool pump covers hide your pool pump, filter, chlorinator and heater behind neat 65mm aluminium slats while still letting air flow through. Each pool equipment enclosure is custom cut to your size and supplied flat packed for a DIY install. The same enclosures also conceal air-conditioning units, bins and other outdoor equipment.
- With lid: a lift-up slat lid on stainless steel gas struts, plus front access doors for servicing.
- Without lid: an open-top pool filter cover that also suits air conditioners, bins and taller equipment.
- Made to measure: choose the width, depth and height, colour or mill finish, 0mm, 5mm or 9mm slat spacing, back panel and single or double doors.
Custom Pool Pump Covers and Equipment Enclosures
Create a cleaner, more organised outdoor area with a custom aluminium equipment enclosure from Auswide Frameless. These modern slatted enclosures are suitable for concealing pool pumps, filters, chlorinators, air-conditioning units, rubbish bins and other outdoor equipment while maintaining convenient access for ventilation and servicing.
Each enclosure is custom cut according to your selected dimensions and supplied as a flat-pack kit with the required aluminium components, access doors and hardware.
Choose an Enclosure With or Without a Lid
Our aluminium equipment enclosure range includes both open-top and lidded configurations.
An equipment enclosure with a lid provides additional screening above the equipment and includes a lift-up aluminium slat lid supported by stainless steel gas struts. It is a practical choice for pool pumps, filters and equipment that benefits from screening on all visible sides.
A without-lid equipment enclosure provides an open-top design suited to bins, air-conditioning units, taller equipment and installations where unrestricted overhead access is preferred.
Configure the Enclosure to Suit Your Installation
Use the product configurator to select the options required for your project, including:
- Finished width, height and depth
- Powder-coated or mill finish
- 0mm, 5mm or 9mm slat spacing
- Open or slatted back options, where available
- Single or double front access doors
- An open-top design or lift-up lid
The configured price updates according to the selected dimensions and options, allowing you to review the complete price before adding the enclosure to your cart.
Modern 65mm Aluminium Slat Construction
Our equipment enclosures feature 65 × 16mm horizontal aluminium slats for a clean architectural appearance. Multiple powder-coated finishes are available to coordinate with popular Australian fencing, screening and exterior colour schemes.
Aluminium provides a durable and low-maintenance alternative to timber screening. It will not rot and does not require the regular repainting generally associated with exposed timber products.
How to Measure for a Pool Pump Cover
Enter the required external finished width, height and depth when configuring your enclosure. Allow sufficient internal space around pool pumps, air-conditioning equipment and filters for airflow, pipework and future servicing.
The fixing plates extend approximately 25mm beyond the nominated width and depth on each side. Check the installation area for walls, pipes, fences and other obstructions before ordering.
Flat-Packed Equipment Enclosures Available Australia-Wide
Auswide Frameless supplies custom aluminium equipment enclosures for residential, trade and commercial projects. Products are supplied flat packed for efficient transport and straightforward assembly.
Pickup and delivery options are available across Australia. Available freight or collection methods will be shown during checkout.
Pool pump cover FAQs
Should I choose an equipment enclosure with or without a lid?
Choose a lidded enclosure when you want additional screening above the equipment. An open-top enclosure is suitable for taller equipment, air-conditioning units, bins or installations requiring unrestricted overhead access.
Will a pool pump cover make my pump overheat?
The slatted design lets air flow through. Leave the clearances your pump, heater or heat pump manufacturer recommends around the equipment when you measure, and choose the open-top version if your equipment needs extra ventilation.
Can I still get to my pool filter and pump?
Yes. The front access doors open for everyday access, and on the lidded version the lid lifts up on gas struts for servicing.
Are the equipment enclosures custom made to size?
Yes. Enter the required finished dimensions in the product configurator and the enclosure components will be custom cut according to your selected size and options.
Are the enclosures supplied assembled?
No. The enclosure is supplied flat packed for efficient transport and is designed for assembly at the installation location.
Can I use it to cover an air conditioner?
Yes. The open-top enclosure suits air conditioning units as well as pool pumps and filters. Leave the clearances the air conditioner manufacturer recommends.
Can I select the colour and slat spacing?
Yes. Available options include multiple powder-coated finishes, mill finish and a choice of 0mm, 5mm or 9mm slat spacing. For matching fences and gates, see aluminium batten fencing.
Save $50–$250 on your first order
5% off product orders of $1,000 to $5,000, and our team is here to help you plan it.
First order only, one use per customer. Excludes sale items. Ends 31 Jan 2027. Privacy
Save $50–$250 on your first order
5% off product orders of $1,000 to $5,000, and our team is here to help you plan it.
First order only, one use per customer. Excludes sale items. Ends 31 Jan 2027. Privacy